Welcome to Zhejiang Shengyang gas equipment manufacturing Co., Ltd
Zhejiang Shengyang Gas Equipment Co., Ltd
BACK
products

SYB type no heat regeneration adsorption drying device   
        

The working principle of

SYB without heat regenerative dryer is according to the principle of pressure swing adsorption to a kind of drying equipment, compressed air adsorption moisture in the compressed air, pressurized conditions make the compressed air when dry, part of decompression with dry compressed air purging adsorbent, born to rain adsorbent, two alternates, recycling and dry compressed air blasting is obtained. According to the different atmospheric pressure dew point of compressed air, choose different adsorbents, commonly used adsorbents are activated alumina, molecular sieve, etc.
        

Product features

◆ set up automatic charging and equalizing process steps to reduce the impact of airflow on adsorbent;

◆ flange type filling mouth and discharge mouth, easy to replace the desiccant;

◆ scientific flow rate design, the selection of high quality adsorbent, to ensure the stability of finished gas dewpoint;

◆ special gas distributor to ensure uniform distribution of airflow, make the compressed air and adsorbent full contact, to prevent adsorption "dead Angle" and "tunnel effect";

◆ adopt German Siemens PLC program controller, liquid crystal display, humanized design, light touch button, and can adjust the regeneration time according to the working condition;

◆ drying and regeneration status display;

◆ dry air at the outlet of the control air source cited from the adsorption tower, to avoid oil and water pollution control valve and air way, to prevent valve rust and air way jam;

◆ high quality control components to ensure long-term and reliable operation of the equipment;

◆ high quality pneumatic valve switch quick, efficient and durable.

 

Technical parameter list

Inlet temperature: ≤45℃

Working pressure: 0.6~ 1.0mpa (1.0~ 3.0mpa can be provided according to user requirements)

Pressure drop: ≤ 0.023mpa

Dew point of finished product at atmospheric pressure: -40℃(alumina), -60℃(molecular sieve)

Regeneration gas consumption: ≤12%

Working power supply: AC220V/50Hz

 

SYB type no heat regeneration adsorption drying device
model SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB- SYB-
1 3 6 10 15 20 25 35 40 50 60 80 100 150 200 300
Air volume (Nm /min) 1 3 6 10 15 20 25 35 40 50 60 80 100 150 200 300
Inlet and outlet size DN 25 32 40 50 50/65 65 65/80 80 100 100 125 125 150 200 200 250
The length of the mm 900 1100 1240 1520 1520 1710 1900 1970 2100 2200 2500 2900 3150 3200 3300 3500
The width of the mm 480 440 470 600 610 740 750 760 780 850 920 1300 1500 1600 1700 1800
Height in mm 1680 1500 1880 1950 2150 2410 2600 2600 2630 2720 2750 3100 3160 4100 4210 4520
Kg weight 170 250 480 800 830 1200 1350 1500 2050 2400 2750 3500 4350 6000 7500 8750
SYN type pressure swing adsorption nitrogen plantSYO pressure swing adsorption oxygen plantSYZ vacuum pressure swing adsorption oxygen plantSYA micro - thermal regeneration adsorption drying deviceSYB type no heat regeneration adsorption drying deviceSYD freeze-drying machineSYI type combined regenerative adsorption drying deviceSYK type waste heat regeneration adsorption drying deviceSYC nitrogen plus carbon purification plantSYH nitrogen hydrogenation purification plantSYM type membrane separation nitrogen plantSYS type cryogenic air separation unitSYE blast regeneration adsorption drying deviceSYG high efficiency oil eliminatorSYQ type oil-water separatorSYJ precision filterSYF dust filterSYT type activated carbon filterSYP type sterilizing filterSYX self - cleaning filterSYU non - self - cleaning filterSYL type high efficiency cooler