Welcome to Zhejiang Shengyang gas equipment manufacturing Co., Ltd
Zhejiang Shengyang Gas Equipment Co., Ltd
BACK
products

SYK type waste heat regeneration adsorption drying device
        

The working principle of

Absorbed heat regenerative dryer has the advantages of heat temperature adsorption dryer stripping and without thermal blot machine room temperature the characteristics of large adsorption capacity, avoid awkward hot blot machine switch time is short, the regeneration gas consumption big shortcoming, also overcomes the disadvantages of large heat blot mechanical and electrical consumption, it takes advantage of the characteristics of high discharge temperature of compressor for the regeneration of the adsorbent dehydration, at the same time using variable temperature pressure swing adsorption principle, a device to dry compressed air. Applicable to the exhaust temperature in 110℃ after the air compressor.


 

Operating conditions and technical indicators

Working pressure: 0.5~ 1.0mpa

Intake oil content: 0.1 PPM

Air inlet temperature: 110℃~220℃

Cooling water pressure: 0.2~0.4MPa

Dry air dew point: -40℃~-60℃

Cooling water temperature: ≤32℃

Regeneration gas consumption: 1%

Adsorption cycle: 8 hours

Capacity: 10~600Nm /min

Pressure loss: ≤ 0.04mpa

Note:

 the exhaust temperature of compressed air must be ≥110℃ to prevent the air from dehydrating the desiccant in depth.

 

SYK type waste heat regeneration adsorption drying device
specifications Processing capacity long wide high Inlet and outlet sizeDN Power consumption The weight of the Cooling water circulation
(Nm³/min) mm mm mm W kg (Nm³/h)
SYK-10 10 2000 1400 2500 50 150 1000 6
SYK-15 15 2000 1500 2800 65 150 1200 7
SYK-20 20 2000 1500 3000 65 150 1650 9
SYK-25 25 2300 1800 2800 80 150 1880 10
SYK-30 30 2300 1800 3000 80 150 2000 12
SYK-35 35 2300 1800 3000 80 150 2200 13
SYK-40 40 2500 1900 2700 80 150 2350 15
SYK-45 45 2500 2000 2700 80 200 2500 18
SYK-50 50 2500 2300 2900 100 200 2800 21
SYK-60 60 3000 2500 2900 100 200 3250 26
SYK-80 80 3200 2500 3200 100 200 4350 32
SYK-90 90 3800 2800 3200 150 200 5000 40
SYK-100 100 4000 2800 3600 150 200 5500 50
SYK-120 120 5000 3000 3800 150 250 6000 56
SYK-150 150 5500 3100 4000 200 250 6500 65
SYK-200 200 6150 3200 4050 200 250 7000 75
SYK-250 250 6350 3300 4500 250 250 8000 80
SYK-300 300 6500 3500 4800 250 250 9500 95
SYK-400 400 7000 3800 5500 300 250 11000 110
SYK-500 500 8000 4500 6500 350 250 15000 130

 

SYN type pressure swing adsorption nitrogen plantSYO pressure swing adsorption oxygen plantSYZ vacuum pressure swing adsorption oxygen plantSYA micro - thermal regeneration adsorption drying deviceSYB type no heat regeneration adsorption drying deviceSYD freeze-drying machineSYI type combined regenerative adsorption drying deviceSYK type waste heat regeneration adsorption drying deviceSYC nitrogen plus carbon purification plantSYH nitrogen hydrogenation purification plantSYM type membrane separation nitrogen plantSYS type cryogenic air separation unitSYE blast regeneration adsorption drying deviceSYG high efficiency oil eliminatorSYQ type oil-water separatorSYJ precision filterSYF dust filterSYT type activated carbon filterSYP type sterilizing filterSYX self - cleaning filterSYU non - self - cleaning filterSYL type high efficiency cooler