SYE blast regeneration adsorption drying device

The working principle of

Air blast regenerative adsorption dryer is a kind of equipment for desiccating agent regeneration after air source of external air blower is heated according to normal temperature adsorption. Therefore, the compressed air is not lost during heating regeneration, and the compressed air is consumed during cold blowing, and the regeneration air consumption is far lower than that of the micro-heat dryer. Blast regenerative dryer, generally used when the compressed air pressure is low.

Technical indicators

Working pressure: 0.5~ 1.0mpa

Air inlet temperature: ≤40℃

Oil content at air inlet: ≤0.1mg/m

Regeneration gas consumption: ≤3%

Pressure drop: ≤ 0.023mpa

Atmospheric dew point: ≤-40℃

The basic characteristics of

1. Low regeneration gas consumption;

2. Three-leaf roots blower has high efficiency, low noise and stable operation;

3. Other features are the same as the micro-hot dryer.